E-Vehicle Battery Chargers

Specially designed wide input range high efficiency & rugged for impulsive load requirements of RO Pump, our RO system SMPS solution are available for wide rage of RO machines ranging from 50GPD to 150GPD systems. SMPS solutions as direct plugable, adaptor enclosure with cable or open frame for using directly inside RO cabinet are available

These solutions are designed to provide all the power requirements of Residential / Commercial [RO/ UV] Water Purifiers. They have been designed to operate for wider AC Input range (100 - 300VAC) and to withstand the universal power conditions. They are designed with high frequency switching technology which makes them highly reliable, cost effective, compact in size and light in weight.

  • Accurate Battery Charging Current Limit.
  • Battery reverse polarity protection.
  • Micro Controller based 5 stage intelligent charger.
  • Battery full charge cut off with audio indication.
  • Designed to meet adverse Indian power condition and suitable for different makes of batteries.
  • Enhance life of batteries by reducing sulfation through pulse charging.
  • Non Resettable Accurate Safety Timer for enhanced Battery Protection.
  • Defective battery detection with alarm and auto cut off.
  • Battery full charge cut off with audio indication.
  • Programmable accurate Output Over Voltage protection.
INPUT SPECIFICATION 36V,10.0A 48V,10.0A
Input Voltage Range 180VAC-300VAC-50/60Hz 180VAC-300VAC-50/60Hz
Inrush Current <40APeak @ 230VAC,Cold start @ 25°C <50APeak @ 230VAC,Cold start @ 25°C
Input Current <4A rms @ 180VAC and output full load <5A rms @ 180VAC and output full load
OUTPUT CHARACTERISTICS
Output Voltage 45VDC 60VDC
Output current max 10.0Amp 10.0Amp
Line &Load Regulation Tolerance ±5% Measured at the cable end Tolerance ±5% Measured at the cable end
Ripple <450mV.Pk-Pk <600mV.Pk-Pk
Output Over Current limit(Min) 9.5 A 9.5Amp
Output Over Current limit(Max) 10.5 A 10.5Amp
PROTECTIONS
Output overload protection Available Available
Output short circuit protection Available Available
Output over voltage Protection Available Available
Input over voltage protection Available Available
Battery reverse protection Available Available
Faulty battery detection & disconnection Available Available
Battery full Charge auto cutt-off Available Available
Battery full Charge auto cutt-off Available Available
SAFETY & EMI
Safety Designed to meet IEC 60950 Designed to meet IEC 60950
EMI CISPR22 / FCC Class-A CISPR22 / FCC Class-A
MECHANICALS
Out side dimensions W=199.0mm,D=224.0mm,H=92.0mm W=199.0mm,D=224.0mm,H=92.0mm
AC Input connection 3 Pin AC plug with 2 core cable directly soldered to the PCB 3 Pin AC plug with 2 core cable directly soldered to the PCB
DC Output Connection Terminal Connector Terminal Connector